14-Inch High Frequency compression driver designed to operate between the frequencies of 1,000 Hz to 18 kHz and can handle 100 Watts of peak power. The 14XT is designed with a solid, one- piece titanium diaphragm, a 1.4 inch voice coil and a high temperature kapton coil former. The one-piece titanium diaphragm, in conjunction with the edge wound voice coil, reduces the moving mass extending the high frequency response of the driver. The high temperature kapton coil former allows the driver to reach 100 Watts of peak power while the large magnet structure wicks the heat away from the voice coil.
High frequency compression driver
Commercially pure titanium diaphragm
Designed with a solid one- piece titanium diaphragm
Edge-wound ribbon with high temp Kapton bobbin voice coil material
Improves the system performance, reliability and power handling
Warranty - Yes
Spec Sheet available - Yes
Maximum Frequency Response (Bandwidth):
18000 Hz
Maximum Frequency Response (Bandwidth):
18 kHz
Minimum Frequency Response (Bandwidth):
1 kHz
Minimum Frequency Response (Bandwidth):
1000 Hz
Impedance:
8 ohm
Sensitivity:
102 dB
Peak Power:
100 Watt
Depth:
2.75 in
Product Weight:
2.08 lbs
Shipping Weight:
2.31 lbs
Warranty (Length/Type):
1 year
Dimensions:
3.500 in 91.44 mm diameter
Throat Parameter:
1 in
Minimum Impedance:
7.1 ohms
DC Resistance:
6.8 ohms
Nominal Efficiency:
30 %
Recommended Crossover:
1800 Hz
Lowest Recommended Crossover:
1000 Hz at 12 dB / Octave