Wireless Signal Processing : Beltpack Receivers & Transmitters (Wireless) : Media Vision - HCS-5100R

Digital IR Receiver

Series: TAIDEN

Model: HCS-5100R

Compliant to IEC 61603-7 and IEC 60914
Compatible with any other IR simultaneous interpretation system compliant to IEC 61603-7
Unique 270º super wide reception angle, ensuring perfect sound quality even when casually placed
Transmitting in 2~8 MHz frequency band eliminates disturbance from high frequency lighting systems
Channel selection via up/down button, at most 4,8,16 or 32 channels available

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

HCS-5100R is a series of IR receivers, that can receive 4, 8, 16 or 32 language channels. A unique 270 degrees reception angle ensures perfect sound quality even when receivers are casually placed. Can be used with rechargeable NI-HM battery or disposable AA batteries. The receiver is equipped with channel selector, volume control, power switch, Ø 3.5 mm stereo earphone jack, and charging circuit on the PCB. The large LCD displays channel number with language name, signal intensity, battery capacity and volume.

Compliant to IEC 61603-7 and IEC 60914
Compatible with any other IR simultaneous interpretation system compliant to IEC 61603-7
Unique 270º super wide reception angle, ensuring perfect sound quality even when casually placed
Transmitting in 2~8 MHz frequency band eliminates disturbance from high frequency lighting systems
Channel selection via up/down button, at most 4,8,16 or 32 channels available
LCD display with channel number, language name, battery and reception signal status
Number of available channels is always the same as the number of channels in use by the system, eliminating the need to scroll through unused channels
Audio signal automatically muted when signal is too low, ensuring that the user receives only high quality audio
Ergonomically compact and elegant design
Lightweight and handy receiver in conjunction with single earphone (EP-820AS/EP-820BS) or headphone (HCS-5100PA) for easy and comfortable use
Can be hung over the neck via a nice strap or fit into the shirt pocket
Freedom of movement within the range of IR power radiator
No limit to the number of receivers within the IR power radiation range
Works without errors, even in bright sunlight
Built-in high precision rechargeable circuitry to prolong the battery life
Can be used with disposable batteries (2×AA alkaline batteries, not included) or environmentally-friendly Ni-MH rechargeable battery pack (not included)
No power consumption when headphone is disconnected
Measurement mode for easy checking of radiator coverage
Room can be equipped with detection alarm system to prevent loss
Can work in conjunction with HCS-5300 digital infrared wireless conference system

Wireless Receiver Transmission - IR
Wireless - Yes
Spec Sheet available - Yes

Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Total Harmonic Distortion + Noise (THD+N): 0.05 %
Depth: 24 in
Height: 155 in
Width: 46 in
Product Weight: 297.62 lbs
Color: Gray
Regulatory Compliance: IEC 61603-7, IEC 60914
THD: at 1 KHz <0.05%
Crosstalk Attenuation: at 1 kHz >80 dB
Dynamic Range: >80 dB
Weighted: SNR >80 dBA
Input Range: -12 dBV ~ +12 dBV (adjustable)
IR Irradiance Level: 4 mW/m2 per carrier
Angle of sensitivity: 270º
Headphone Output Level: at 2.4 V 450 mVrms (speech at maximum volume, 32 Ohm headphone)
Headphone output freq. range: 20 Hz to 20 kHz
Headphone Output Impedance: 32 Ohm to 2 kOhm
Max. SNR: >80 dBA
Supply Voltage: 1.8 to 3.6 V, nominal 2.4 V
Battery Life: 2×AA alkaline cells 70 hours Rechargeable battery pack 52 hours

HCS-5300 Series - Digital Infrared Wireless Conference System

HCS-5100R Datasheets 158 kb - Data Sheet

Project List

Digital IR Receiver

Series: TAIDEN

Model: HCS-5100R

Suggested Products

Quick Links