Pro AV Catalog
Request Quote
All Products

4K Ultra HD HDBaseT Receiver with Audio De-embedder and POH

Model: EXT-UHDA-HBTL-RX

  • Supports 300MHz TMDS Clock and data throughput of up to 10.2Gbps
  • RS-232 control of switching, scaler, and EDID management functions of a compatible Sender
  • Bi-Directional RS-232 extension when used with a compatible Sender
  • 2-way IR extension when used with a compatible Sender
  • Digital (optical and coaxial) and Analog audio breakout
Compare
Project List
Product Info
Tech Specs
Documents

The Gefen EXT-UHDA-HBTL-RX is a high-performance HDBaseT™ Receiver that can extend HDMI up to 70 meters (230 feet) at 1080p and 40 meters (130 feet) at 4K, over a single CAT-5e cable. It also de-embeds analog L/R, TOSLINK® optical digital, and coaxial digital audio from the video for use with a separate audio system, enhancing the impact of presentations. This Receiver uses Gefen’s implementation of the HDBaseT™ technology with enhanced functionality. It accommodates 10.2 Gbps of data throughput and 300 MHz TMDS Clock frequency, and supports HDMI 2.0 resolutions up to 4K Cinema-DCI (4096 x 2160 to 30 Hz 4:4:4) and 4K Ultra HD (3860 x 2160 to 60 Hz, 4:2:0, or 30 Hz 4:4:4), with HDCP 2.2 or 1.4. Highest performance multichannel digital audio including 7.1 channels of LPCM and HBR (High Bit Rate) digital audio formats, such as Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™ are passed through to the HDMI output. The EXT-UHDA-HBTL-RX also extends RS-232 and 2-way IR when used with a compatible Sender unit, facilitating the control of A/V sources placed near the Sender from the viewing location, and sending commands from the head end to control the display or another device placed near the Receiver unit. It can also send RS-232 commands from a third-party controller placed by the Receiver, for switching, scaler controls, and EDID management of a compatible Sender unit. Bi-Directional HDBaseT™ standard POH (Power Over HDBaseT™) technology can supply power remotely from the Receiver unit to a compatible Sender unit, or it can pass power from a compatible Sender unit to the Receiver, using the same CAT-5 cable that extends the HDMI signal. Only one of the two units will need a power supply. This feature simplifies installation in cases when an electrical outlet may not be available near the source or the display. The Receiver’s small, ultra-low-profile enclosure can be securely surface-mounted and conveniently hidden away from sight behind the display. It also accommodates a Gefen locking power supply plug for secure connection.

  • Supports 300MHz TMDS Clock and data throughput of up to 10.2Gbps
  • RS-232 control of switching, scaler, and EDID management functions of a compatible Sender
  • Bi-Directional RS-232 extension when used with a compatible Sender
  • 2-way IR extension when used with a compatible Sender
  • Digital (optical and coaxial) and Analog audio breakout
  • Uses Gefen’s implementation of HDBaseTâ„¢ technology with enhanced features
  • Field-updateable firmware via RS-232 and using the Gefen Syner-Gâ„¢ software
  • Locking power connector
  • Compact, ultra-low-profile enclosure is surface-mountable and can be hidden away
 
Request Quote
 

Suggested Products

by Bosch Conferencing and Public Address Systems
by Bosch Conferencing and Public Address Systems
Share by: